Netis P116GH Network POE Switch
Hardware
Interface
16*10/100Mbps POE ports ( Data/Power)
2*10/100/1000M
uplink RJ45 ports (Data)
1*10/100/1000M
uplink SFP slot port (Data)
Basic
function
Follow
IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports
POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward
switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging
Standards
IEEE
802.3 10BASE-T Ethernet
IEEE
802.3i 10BASE-T Ethernet
IEEE 802.3u
100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
Mode
Normal
switch mode/Extend mode
Data
Transfer Rate
Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)
Fast
Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)
Store
& Forwarding
Yes
Switching
Capacity
9.2G
MAC
Address
Table Size
8K
Jumbo
Frame
2048
byte
Environment
Operation
Temperature : 0 ℃ ~ 40 ℃
Storage
Temperature : -40 ℃ ~ 70 ℃
Operation
Humidity : 10% ~ 90% RH Non-condensing
Storage
Humidity : 5% ~ 90% RH Non-condensing
Power
Input POE
Standards
Single
port maximum power 30W,
Whole
switch maximum power 240W
Support
over-current,over-voltage and short-circuit protection
Support
Soft Start of High Power PD
Support
sequential boot-up
Power
Supply Pin:12+/36-
100-240V
3A Max(Input)
52V
5A Max(Output)
Cabling
type
100Base-TX:
Cat 5e or better UTP/STP(≤100m)
10Base-TX:
Cat 5e or better UTP/STP(≤250m)
Dimensions
(L x
W x H )
280mm*180mm*43mm